美国激光标准合集

大中小

2021-08-24 23:53:04

阅读：次

标准编号	中文名称	英文名称
ANSI Z136.1 Errata-1993	激光的安全使用.勘误表	Safe use of lasers; Errata
ANSI Z136.1-2000	激光器的安全使用	Safe Use of Lasers
ANSI Z136.2-1997	激光二极管和LED光源的光纤通信系统的安全使用	Safe Use of Optical Fiber Communication Systems Utilizing Laser Diode and LED Sources
ANSI Z136.3-2005	保健设施中激光器的安全使用	Safe Use of Lasers in Health Care Facilities
ANSI Z136.4-2005	危害评定用激光器安全测量的美国国家标准推荐实施规程	American National Standard Recommended Practice for Laser Safety Measurements for Hazard Evaluation
ANSI Z136.5-2000	教育机构中激光设备的安全使用	Safe Use of Lasers in Educational Institutions
ANSI Z136.6-2005	户外激光器的安全使用	Safe Use of Lasers Outdoors
ANSI/ASME B89.4.19-2006	基于球形坐标测量系统的激光器性能评价	Performance Evaluation of Laser Based Spherical Coordinate Measurement Systems
ANSI/AWS C7.2-1998	激光束焊接、切割和打孔推荐规程	Recommended Practices for Laser Beam Welding, Cutting, and Drilling
ANSI/EIA/TIA 455-127-1991	多模激光器的光谱特征	Spectral Characterization of Multimode Lasers
ANSI/EIA/TIA 455-48B-1990	光纤包覆层直径的激光类仪器测量	Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments
ANSI/NFPA 115-2003	激光器防火措施	Laser Fire Protection
ANSI/TIA-455-130-2001	激光二极管的高温寿命试验	Elevated Temperature Life Test for Laser Diodes
ANSI/TIA-455-48B-1990	利用激光仪器测量光纤包覆层直径	Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments
ANSI/TIA-568-B.1-4-2003	商用建筑电信电缆敷设标准.第1部分:一般要求.补充件4. 第6类850nm激光优选的50/125微米多模纤维的鉴别	Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber
ANSI/TIA/EIA 455-128-1996	半导体激光器阈值电流的测定程序	Procedures for Determining Threshold Current of Semiconductor Lasers
ANSI/TIA/EIA 455-130-2001	激光二极管的抗高温寿命试验	Elevated Temperature Life Test for Laser Diodes
ANSI/TIA/EIA 455-48B-1990	用激光测量仪测量光纤连皮直径	Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments
ANSI/TIA/EIA 568-B.1-4-2003	商用建筑电信电缆敷设标准.第1部分:一般要求.附录4.类别6、850nm激光优选50/125微米多模纤维	Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber
ASTM A 1006/A 1006M-2000	激光束焊、平头、无镀层、钢制总管的标准规范	Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded
ASTM C 1070-1986	用激光扩散法测定氧化铝和石英粒度分布的试验方法	Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
ASTM D 3460-1998	有白色水印和无水印的票据、油印机、复印机、复照和激光打印机用按尺寸切割的办公用纸的标准规范	Standard Specification for White Watermarked and Unwatermarked Bond, Mimeo, Spirit Duplicator, Reprographic, and Laser Printer Cut-Sized Office Papers
ASTM D 4464-2000	激光散射测定催化材料粒度分布的标准试验方法	Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering
ASTM D 5174-2002	用脉冲激光磷光光度法测定水中微量铀的标准试验方法	Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry
ASTM D 6187-1997	带有氮激光感应荧光的石油污染位点的锥形透度计技术特性的标准操作规程	Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
ASTM D 6466-1999	用Sirolan激光扫描纤维直径分析仪测定羊毛和其它动物纤维直径的标准试验方法	Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
ASTM D 7134-2005	用矩阵辅助激光解吸/离子化(MALDI)-飞行时间(TOF)质谱(MS)法测定无规立构聚苯乙烯的平均分子量和分子量分布	Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
ASTM D 7153-2005	航空燃料冻结点的标准试验方法(自动激光法)	Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
ASTM E 1458-1992	用光掩模原版校准检验激光绕射粒子定尺寸仪器的试验方法	Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM F 1364-2003	使用校准设备验证干涉激光成像无损轮胎检验系统检验能力的标准实施规范	Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
ASTM F 1457-1994	与激光打印机相关的术语	Standard Terminology Relating to Laser Printers
ASTM F 1457b-1994	与激光打印机相关的标准术语	Standard Termninology Relating to Laser Printers
ASTM F 1497a-1999	导管轴耐激光性能测定的标准试验方法	Standard Test Method for Determining Laser Resistance of the Shaft of Tracheal Tubes
ASTM F 1628-1995	激光外科学用套箍和未套箍气管导管及有关治疗的标记和标志的标准规范	Standard Specification for Labeling and Marking of Cuffed and Uncuffed Tracheal Tubes and Related Treatments Intended for Use During Laser Surgery
IEEE 647-1995	单轴激光陀螺规格导则和试验规程	(Format guide and test procedure for single-axis laser gyros)