英国激光标准合集

大中小

2021-08-24 23:58:15

阅读：次

英国激光标准合集(图1)

编号	中文名称	英文名称
BS 3900-J13-2001	涂料的试验方法.涂覆粉试验.用激光衍射法分析粒径	Methods of test for paints - Testing of coating powders - Particle size analysis by laser diffraction
BS 5381-2-1998	烟草和烟草制品物理特性测定方法.第2部分:用激光束测量仪器测定卷烟和滤嘴标准直径	Methods for determination of physical properties of tobacco and tobacco products - Nominal diameter of cigarettes and filter rods using a laser beam measuring apparatus
BS 6955-1-1994	振动和冲击传感器的校准.采用激光干涉测量法对主振动的校准方法	Calibration of vibration and shock pick-ups - Methods for primary vibration calibration by laser interferometry
BS 7334-6-1992	建筑施工用测量仪器.第6部分:激光仪器使用精度的测定方法	Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
BS DD IEC/PAS 61280-2-10-2003	纤维光学通信子系统试验程序.数字系统.激光发射机的时间分辨线性调频脉冲和α因数测量	Fibre optic communication subsystem test procedures - Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters
BS EN 12254-1999	激光工作场所用屏幕.安全要求和试验	Screens for laser working places - Safety requirements and testing
BS EN 12584-1999	氧气火焰切割、激光束切割和等离子体切割缺陷.术语	Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology
BS EN 15042-1-2006	覆层厚度测量和表面波纹表征.采用激光感应表面声波法对各膜层的弹性常数、密度和厚度的测定指南	Thickness measurement of coatings and characterization of surfaces with surface waves - Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves
BS EN 207-1999	眼睛保护.抗激光辐射用滤光镜和护目器(激光护目镜)	Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors)
BS EN 208-1999	眼睛防护.激光和激光系统调节工作用护目镜(激光调节护目镜)	Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
BS EN 2266-005-2005	航空航天系列.通用电缆.操作温度为-55 °C 到 200 °C .紫外激光可印刷.产品标准	Cables, electrical, for general purpose — Operating temperatures between??-55 ℃ and 200 ℃ — Part 005: UV laser printable — Product standard
BS EN 2266-007-2005	航空航天系列.通用电缆.操作温度为-55 °C 到 200 °C .紫外激光可印刷多芯装套电缆.产品标准	Cables, electrical, for general purpose — Operating temperatures between –55 ℃ and 200 ℃ — Part 007: UV laser printable multicore jacketed cable — Product standard
BS EN 2267-007-2005	航空系列.一般用途的电缆,电器.-55°C和260°C之间的操作温度.DMA族、单个可打印紫外激光和多芯附件.产品标	Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 007: DMA family, single ink-jet printable and multicore assembly — Product standard
BS EN 2267-008-2005	航空系列.一般用途的电缆,电器.-55°C和260°C之间的操作温度.DM族、单个可打印紫外激光和多芯附件.产品标	Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 008: DM family, single UV laser printable and multicore assembly — Product standard
BS EN 2267-009-2005	航空系列.一般用途的电缆,电器.-55℃和260℃之间的操作温度.DRA族、单个可打印UV激光和多芯附件.产品标准	Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 009: DRA family, single and multicore assembly — Product standard
BS EN 2267-010-2005	航空系列.一般用途的电缆,电器.-55℃和260℃之间的操作温度.DM族、单个可打印UV激光.产品标准	Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 010: DR family, single UV laser printable — Product standard
BS EN 2713-007-2005	航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和200 °C之间.屏蔽式（螺旋式）和有护套的可印	Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, UV laser printable - Product standard
BS EN 2714-007-2005	航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和260 °C之间.屏蔽式（螺旋式）和有护套的可印	Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 007: Screened (spiral) and jacketed, UV laser printable — Product standard
BS EN 2714-011-2005	航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和260 °C之间.DM族、屏蔽式（螺旋式）和有护套	Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 011: DM family, screened (spiral) and jacketed, UV laser printable — Product standard
BS EN 2714-012-2005	航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和260 °C之间.DM族、屏蔽式（麻花型）和有护套	Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 012: DM family, screened (braided) and jacketed, UV laser printable — Product standard
BS EN 2714-013-2005	航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和260 °C之间.DM族、屏蔽式（螺旋式）和有护套	Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 013: DR family, screened (spiral) and jacketed, UV laser printable — Product standard
BS EN 31253-1996	激光和相关设备.激光装置.机械接口	Lasers and laser-related equipment - Laser device - Mechanical interfaces
BS EN 3475-706-2005	航空航天系列.飞行器用电缆.试验方法.激光可标记性	Cables, electrical, aircraft use — Test methods — Part 706: Laser markability
BS EN 60601-2-22-1996	医疗电气设备.安全专门要求.激光诊断和治疗设备规范	Medical electrical equipment - Particular requirements for safety - Specification for diagnostic and therapeutic laser equipment
BS EN 60825-1-1994	激光产品的辐射安全性.第1部分:设备分类、要求和用户指南	Safety of laser products - Equipment classification, requirements and user's guide
BS EN 60825-12-2004	激光产品的安全.用于信息传输的自由空间光通信系统的安全	Safety of laser products - Safety of free space optical communication systems used for transmission of information
BS EN 60825-2-2004	激光产品的安全.光纤通信系统的安全	Safety of laser products - Safety of optical fibre communication systems (OFCS)
BS EN 60825-4-1998	激光产品安全.激光防护装置	Safety of laser products - Laser guards
BS EN 60856-1993	50HZ/625行预录式光反射视盘录像系统"激光视盘".PAL制规范	Specification for pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines - PAL
BS EN 61040-1993	激光辐射功率和能量探测器、仪表和设备规范	Specification for power and energy measuring detectors, instruments and equipment for laser radiation
BS EN 61096-1993	数字激光唱机用放音设备特性测量方法	Methods of measuring the characteristics of reproducing equipment for digital audio compact discs
BS EN 61280-1-4-2003	光纤通信子系统基本试验程序.一般通信子系统的试验程序.多模纤维激光发射机用二维近场数据的采集和整理	Fibre optic communication subsystem basic test procedures - Test procedures for general communication subsystems - Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters
BS EN 61751-1998	激光电信模块.可靠性评定	Laser modules used for telecommunication - Reliability assessment
BS EN 62107-2002	高级激光视盘.光盘互换系统.规范	Super video compact disc - Disc-interchange system-specification
BS EN 62148-11-2004	纤维光学有源元件及器件.包装和接口标准.14针调制器集成激光二极管发射机	Fibre optic active components and devices - Package and interface standards - 14-pin modulator-integrated laser diode transmitters
BS EN 62148-12-2004	纤维光学有源元件和器件.包装和接口标准.带同轴RF连接器的激光发射机	Fibre optic active components and devices - Package and interface standards - Laser transmitters with coaxial RF connector
BS EN 62149-3-2004	纤维光学有源元件和器件.性能标准.2.5Gbit/s调制器-集成激光二极管发射机	Fibre optic active components and devices - Performance standards - 2,5 Gbit/s modulator-integrated laser diode transmitters
BS EN 821-2-1997	高技术陶瓷.整体陶瓷.热物理特性. 激光闪烁法(或热脉冲法)对热扩散率的测定	Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Determination of thermal diffusivity by the laser flash (or heat pulse) method
BS EN ISO 11146-1-2005	激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.无象散和简单象散束	Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Stigmatic and simple astigmatic beams
BS EN ISO 11146-2-2005	激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.一般象散束	Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - General astigmatic beams
BS EN ISO 11149-1997	光学和光学仪器.激光和激光相关装置.非远程通信激光用的光纤连接器	Optics and optical instruments - Lasers and laser related equipment - Fibre optic connectors for non-telecommunication laser applications
BS EN ISO 11151-1-2000	激光和激光相关设备.标准光学元件.紫外线、可见光和近红外光谱范围内的元件	Lasers and laser-related equipment - Standard optical components - Components for the UV, visible and near-infrared spectral ranges
BS EN ISO 11151-2-2000	激光和激光相关设备.标准光学元件.红外光谱范围内的元件	Lasers and laser-related equipment - Standard optical components - Components for the infrared spectral range
BS EN ISO 11252-2004	激光和激光相关设备.激光装置.文献工作的最低要求	Lasers and laser-related equipment - Laser device - Minimum requirements for documentation
BS EN ISO 11254-1-2000	激光和激光相关设备.光表面激光导致损伤阈的测定.1-on-1试验	Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - 1-on-1 test
BS EN ISO 11254-2-2001	激光和激光相关设备.光表面激光导至损伤阈值的测定.S-on-1试验	Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - S-on-1 test
BS EN ISO 11551-2004	光学和光学仪器.激光和激光设备	Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components
BS EN ISO 11553-1-2005	机械安全.激光加工机械.一般安全要求	Safety of machinery - Laser processing machines - General safety requirements
BS EN ISO 11670-2003	激光器和激光相关设备.激光束参数的试验方法.束定位稳定性	Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability
BS EN ISO 11810-1-2005	激光和激光相关设备.手术布单和/或病人保护覆盖物耐激光性的试验方法和分类.基本点燃和穿透性	Lasers and laser-related equipment - Test method and classification for laser resistance of surgical drapes and/or patient protective covers - Primary ignition and penetration
BS EN ISO 11990-2003	光学和光学仪器.激光器和相关的激光设备.气管柄抗激光性的测定	Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts
BS EN ISO 12005-2003	激光器和激光相关设备.激光束参数的试验方法.偏振	Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization
BS EN ISO 13694-2001	光学和光学仪器.激光和激光设备.激光束能量密度分布的试验方法	Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution
BS EN ISO 13695-2004	光学和光子学.激光和相关设备.激光的光谱特性的试验方法	Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers
BS EN ISO 13919-1-1997	焊接.电子和激光束焊接接头.缺陷的质量级别导则.钢	Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Steel
BS EN ISO 13919-2-2001	焊接.电子和激光束焊接接头.缺陷的质量分级指南.铝及其可焊合金	Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Aluminium and its weldable alloys
BS EN ISO 15367-1-2003	激光和激光相关设备.测定激光束波阵面形状的试验方法.术语及基础领域	Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Terminology and fundamental aspects
BS EN ISO 15609-4-2004	金属材料焊接程序的规范和合格鉴定.焊接程序规范.激光束焊接	Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Laser beam welding
BS EN ISO 15614-11-2002	金属材料焊接程序的规范和合格鉴定.焊接程序试验.电子和激光束焊接	Specification and qualification of welding procedures for metallic materials - Welding procedure test - Electron and laser beam welding
BS EN ISO 15616-1-2003	高质量焊接和切割用CO2激光束机的验收试验.通用原则和验收条件	Acceptance tests for CO2- laser beam machines for high quality welding and cutting - General principles, acceptance conditions
BS EN ISO 15616-2-2003	高质量焊接和切割用CO2激光束机的验收试验.静态和动态精确度的测定	Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Measurement of static and dynamic accuracy
BS EN ISO 15616-3-2003	高质量焊接和切割用CO2激光束机的验收试验.气体流量和压力测量仪的校正	Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Calibration of instruments for measurement of gas flow and pressure
BS EN ISO 17526-2003	光学和光学仪器.激光器和激光相关设备.激光器的使用寿命	Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers
BS EN ISO 22827-1-2006	Nd:YAG激光束焊接机器的验收试验.带光纤送的机器.激光装配	Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Laser assembly
BS EN ISO 22827-2-2006	Nd:YAG激光束焊接机器的验收试验.带光纤传送的机器.移动机理	Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Moving mechanism
BS IEC 60825-8-2000	激光产品的安全.医疗激光设备安全使用指南	Safety of laser products - Guidelines for the safe use of medical laser equipment
BS ISO 10110-13-1998	光学和光学仪器.光学元件和系统图纸的制备.第13部分:激光辐射损坏阈值	Optics and optical instruments - Preparation of drawings for optical elements and systems - Laser irradiation damage threshold
BS ISO 10110-17-2004	光学和光学仪器.光学元件和系统制图准备.激光辐射损害阈	Optics and optical instruments - Preparation of drawings for optical elements and systems - Laser irradiation damage threshold
BS ISO 13320-1-2000	粒度分析.激光衍射方法.一般规则	Particle size analysis - Laser diffraction methods - General principles
BS ISO 14408-1998	激光外科用气管管子的设计.标记和附加信息要求	Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
BS ISO 16063-11-2001	振动和冲击传感器的校准方法.采用激光干涉量度法的主要振动校准	Methods for the calibration of vibration and shock transducers - Primary vibration calibration by laser interferometry
BS ISO 16063-13-2002	振动和冲击传感器的校准方法.采用激光干涉测量法的主要冲击校准	Methods for the calibration of vibration and shock transducers - Primary shock calibration using laser interferometry
BS ISO 22826-2006	金属材料焊缝的破坏性试验.激光和电子束焊测定窄接头硬度的试验(维氏和努氏硬度试验)	Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
BS ISO TR 11552-1998	激光和与激光相关的设备.激光材料-加工机械.金属切削的性能规范和基准点	Lasers and laser-related equipment - Laser materials-processing machines - Performance specifications and benchmarks for cutting of metals
BS ISO TR 11991-1997	上导气管激光外科手术时导气管的管理指南	Guidance on airway management during laser surgery of upper airway
BS QC 720102-1997	光纤系统和子系统用带引线的激光二极管模数的空白详细规范	Blank detail specification for laser diode modules with pigtail for fibre optic systems and subsystems